Diễn đàn chơi game offline

Game-offline.com - Nơi chia sẽ , trao đổi kinh nghiệm chơi các game ofline hay.

You are not logged in.

#1 2020-09-13 22:32:15

From: Finland
Registered: 2020-09-13
Posts: 2

Connect a Robox to the Mote or Root via the USB cable

Posted on Thursday January 01, 1970

Posted on Thursday January 01, 1970

Posted on Thursday January 01, 1970

Posted on Thursday January 01, 1970

Posted on Thursday January 01, 1970

Posted on Thursday January 01, 1970

Posted on Thursday January 01, 1970

Posted on Thursday January 01, 1970

Root Pete Pete  2020-07-07T16:14:25+01:00           Root & Mote

[canvasio3D width=”500″ height=”500″ border=”0″ borderCol=”#F6F6F6″ dropShadow=”0″ backCol=”#FFFFFF” backImg=”” mouse=”on” rollMode=”on” rollSpeedH=”0″ rollSpeedV=”0″ objPath=”root_case_assembled” objScale=”0.5″ objColor=”#50514F” lightSet=”7″  reflection =”off” refVal=”5″ objShadow=”off” floor=”off” floorHeight=”42″ lightRotate=”off” vector=”off” mousewheel=”on” Help=”off”] [/canvasio3D]  RoboxRoot.
Remote access with WiFi.
Robox Root is a  connectivity  extension platform for all Robox printers which provides remote network access including WiFi.
Root package content:.
Root case (3D printed in 2 parts).
Raspberry Pi3 Model B (fitted to case).
16GB microSD card (fitted to Pi).
Power supply 5.1V 2.5A  including  EU, UK, US and AUS mains adaptor.
[canvasio3D width=”500″ height=”500″ border=”0″ borderCol=”#F6F6F6″ dropShadow=”0″ backCol=”#FFFFFF” backImg=”” mouse=”on” rollMode=”on” rollSpeedH=”0″ rollSpeedV=”0″ objPath=”https://cel-robox.com/wp-content/uploads/2019/10/mote_v6_assembled.stl” objScale=”0.5″ objColor=”#50514F” lightSet=”7″  reflection =”off” refVal=”5″ objShadow=”off” floor=”off” floorHeight=”42″ lightRotate=”off” vector=”off” mousewheel=”on” Help=”off”] [/canvasio3D]  RoboxMote.
Touchscreen &  Networking .

Robox Mote is our custom designed controller for Root

Using a 5” touch screen  connected  directly to Root, you can see the status of any connected machines and also control them directly.
The case for Mote also houses the Root hardware which  is included .
Mote package content:.
Mote case (3D printed in 3 parts).
5 inch  touchscreen  display (fitted to case).
Raspberry Pi3 Model B (fitted to case).
16GB microSD card (fitted to Pi).
Power supply 5.1V 2.5A  including  EU, UK, US and AUS mains adaptor.
Mote Desktop stand.

Buy Robox Root    Buy Robox Mote      Required items which are not included:

A computer which can run the current Auto Maker .
A Robox.
A network which will allow connection between the Root or Mote device and your computer usually via access to a spare LAN port on or connected to the router (LAN cable required).
For Wifi setup, the WiFi password and SSID.
2.4ghz WiFi only, not 5.0.
In some networks setups: Access to the router page which shows connected IP address or access to a HDMI capable TV and cable to view the IP address which the Pi is using for Wifi.
Downloadable .stl files for cases:.
If you choose to build your own Root or Mote you can download the .stl files below.
Each case requires 2 screws, we used socket cap screws with 3.8mm diameter 2mm depth heads with a thread diameter of 2mm and a thread length of at least 6mm.
A longer thread is OK as there is space behind the screw boss.
The mote case also has spaces on the bottom for stick on rubber feet, we used 6mm diameter dome shaped self adhesive pads.
Root case for Raspberry Pi.
Designed for Pi3 but fits Pi2 as well.
STL download.
Mote case.
STL Download.
AutoMaker Setup.
Getting started:.
Some steps are for Mote Only  as marked.
Root is integral to Mote so many parts are the same.
If you have Root only then some steps are more complicated due to the lack of a direct interface to the Root web server.
To see this interface a network connection is required or you can connect a screen to the HDMI port on the Root.
Install AutoMaker updates on the computer you will be using to control Robox.

Minimum requirement to discover Root or Mote is AutoMaker Version 3.01.01

Plug your Robox in and connect your computer to it directly via USB as you normally would.
Allow any firmware updates to complete as requested.
Do not power off until firmware is updated and the machine is displayed in AutoMaker and ready to use again.
If you cannot connect to Robox or there are any errors please report these via the support portal www.cel-robox.com/support/.
Once the software and firmware are updated and ready you can power off and disconnect your Robox.
Keep the computer on with AutoMaker running.
Unpack all the parts, check everything is present and report immediately if something is missing.
Gently press the microSD card to ensure it is still seated in the rear of the case following shipping.
Mote Only Assemble the Desktop stand onto the rear of the Mote case.
The cables can pass through the loop on the stand to keep them tidy.
Connect a LAN cable to the router which serves the same network as your computer.  Connect the other end of this cable to the LAN port on Mote or Root.
Root only If you are using a HDMI screen to view the IP address of Root then you must connect the HDMI before the power to ensure the Pi starts the HDMI devices.
Connect a Robox to the Mote or Root via the USB cable.
Turn the Robox power on.
Fit the appropriate mains connection to the power supply or provide a micro USB power supply with 5 Volts @ 2.5 Amps.
Connect this to the Micro USB Power connector on the side of Mote or Root and turn the power on.
When power is provided the Pi will boot and load Root software automatically, this takes around 30 seconds.
Mote Only  If the screen remains blank please check the HDMI connector is pressed in and power is connected correctly and able to provide correct voltage and amps.
Contact support if you can’t get the screen to work.
You may still be able to use the Root services without the screen so continue to follow the steps below.
In AutoMaker go to the upper right cog icon (Preferences) and click it.
In the Preferences menu click “Network”.

AutoMaker will automatically find Root instances on the same network

Note: If your router does not allow the Root to be discovered you will need to find the IP address via the router admin page.
Typically this is “Connected devices” or “IP list”.
If you have the IP you can add it manually using the input below the list window.
In the screenshot below there are currently 3 active Root devices.
You will only see one unless you have more Root devices on the network.
It will automatically refresh every few seconds so give it 15 seconds or so to boot and assign an IP address before checking connections.
The display will initially show the default settings of Root.
Columns are Name, IP address, Version, Connection Icon (2 plugs) and finally a PIN entry box and a Connect button.
Note: Typically a home network is closed to outside connections by default.
A user could change these settings in the Router administration pages if they wanted to view or allow access local devices from outside the local network.
CEL will not provide advice on removing or altering network security and does not recommend this is done by anyone who cannot reduce the risks of doing so.
The PIN is not intended as a security feature, only as a device to prevent accidental operation.
Network security is not provided or implied.
Enter the default PIN 1111 and press Connect.
If connection is successful the Connection Icon will change from 2 plugs to a single connected plug and the 2 buttons will replace the connect button, “Disconnect” which has obvious usage and “Launch Root Manager”, described below.
At this stage your Robox is connected via USB to Root and Root is connected via the LAN cable and your network to AutoMaker.
If you press the back key you will be able to control your Robox via the regular interface, you can skip to the final step.
If you have multiple Robox units you can connect these to Root and select them in the top left corner of AutoMaker as normal, .

There is a small change to Robox icons connected via Root

You can mix direct USB connections and Root connections with the same instance of AutoMaker and see the difference in the icons.
Choosing a different colour for each Robox helps with control.
Just double click the Robox icon in the top left corner and enter any name you want, pick a colour and press OK.
Device display – Mote – Smartphone – Browser.
Login Screen  The reset button will allow you to set the pin to the default “1111” by entering the details requested.
Enter your pin and press the Key icon.
Home Page / Status Page.

When you view the IP of your Root via a Mote

Smartphone or web browser you will see the status page or if you have several Robox units connected you will see the home page and you will see the arrow in the bottom left to return to the home page.

Any Robox connected to this Root and powered on will be visible on the home page

Status Page.
On the Home page of the Root Manager, click on the entry for your Robox.
If you have named your Robox or changed the colour then the Name and Colour will appear as set.
Different colours are useful when you have several Robox units, up to 6 Robox can be accommodated within the software.
As there are only 4 USB ports on the Pi3 to connect more than 4 devices will require the addition of a USB hub.
The status page will vary depending on the status of your Robox.
If a print is active then you will be able to Pause/Resume or Cancel.
You can click on the icon of the Robox in the top left to change the colour and name of that Robox.
At the bottom centre of the screen the control icon gives access to the controls page.
These pages have various tools which control similar functions to AutoMaker.
Control Page.
This page gives you control over various motions within the active printer.
The upper section is material control.
Blue and Orange sets of buttons.
The blue buttons,  Material 1: move the material toward + or away from – the head in various increments.
The heater button on the right will read the nozzle temperature setting from the associated SmartReel or material profile.
The bed heater icon will read the setting from a SmartReel and heat the bed to this temperature.
Axis movement and homing buttons are available.
Nozzle switching and valve controls will be available when present on the installed head along with light and fan controls.
Wifi Setup.
Note: It is far easier to set up Wifi using a keyboard and the browser view of Root than using a touch screen.
Press “Launch Root Manager” to open your default web browser and attempt a connection to the IP address which has been assigned to your Root.
This IP address is often 192.168.1.xxx:8080 or similar.
The IP address is assigned by your Router and will be visible in the Router Administration pages, the xxx part is unique for each device.
Note: The IP address assigned to the LAN cable connection by your router will be different to the one assigned to the new Wifi connection as they are different devices on the Pi    Connect via a Smartphone or other device.
Once Root is active and has been assigned an IP address it is visible to any other device which is allowed access to the same network.
Check the IP address shown in the AutoMaker Preferences page>Root™ and enter this IP into a web browser on your Smartphone.
Add the port # :8080 at the end of the IP.
Eg if AutoMaker shows an IP address of then you should enter When the page is loaded you will have the same control on your device as that shown on Mote.
Onscreen keyboard wont go away/can’t close.
Click on the screen in a blank space away from the keyboard.
Screen display glitches/black.
Ensure the HDMI connector is seated correctly, in some cases because of alignment of connectors to PCB and to the case the connector may appear to be at a slight angle, if the colours are wrong or the resolution appears low then try skewing the connected a tiny bit, it may line up with the contacts better.
Note: The HDMI connection must be made before the Pi boots.
Fat fingers.
If you are having trouble using the touch screen try the supplied pointer or any other non marking small blunt object.

You can also plug a mouse and keyboard into any USB port to control the Root

See Root errors below for more help, Root is a core part of Mote.
I don’t have a network plug or access to anything except wifi.
It is possible to set up Root using only Wifi but a network cable and access to LAN ports of the Router simplifies setup.

AutoMaker Root preferences screen is not showing my Root

If you have access to the admin page of your router.

Check that the Root is visible as connected and has been assigned an IP

it may appear as “Raspberry Pi” in the list.

Copy the IP address into the Manual Root Control box and press “Add Root”

It should appear in the list now and have normal control.
Typically this will only happen with Wifi connections and will only effect some router or network setups.
If you do not have access to the router IP list then you will need to get the IP via a HDMI connection, ie using Mote or any other HDMI device which can show the video output of the Raspberry Pi such as a television.
Unresponsive or Curser displays as a hand icon, never a mouse pointer.
Restart by disconnecting power for a few seconds then reconnecting.
Root wont boot or screen is black.
There are some lights on the end opposite the USB ports which indicate power and activity.
You may need to look into the holes in the case to see these.
When connecting a HDMI cable the power supply for the Pi needs to be off.
Connect the HDMI first, then the power.
For some reason doing it any other way prevents the screen from activating.
Another possible reason for no boot is a missing, badly connected or unreadable microSD card.
Error in transfer after pressing Make.
“Transfer of the print job failed – the print will be incomplete.
Reconnect the printer to resume transfer”.  Restart AutoMaker, the transfer will resume.
SSH access to pi.
You could use putty or a similar program to access the pi hardware using the following details:  Username: pi Password: CELRoot   More help?.
Raspberry Pi is very widely used in a huge range of applications, Root runs Raspian which boots and then loads Root web server in a web browser, on Mote this is visible on the screen or can be viewed on any screen connected to the HDMI output of the Pi or a web browser directed to the IP of the Root as determined by the Router it is connected to.
You can plug a mouse and keyboard into Root, if you want to stop it from booting to Root or to access Raspian then you will need a keyboard or SSH access.
CTRL+ALT+t will open a new terminal window Use commands such as the following, there are many more options:  sudo shutdown sudo reboot  CTRL+ALT+F1 will open the console giving access to the Pi OS.
https://www.raspberrypi.org/ If you have purchased a Root or Mote from us you can use our support portal for additional help.
www.cel-robox.com/support/ If you want to chat about this or see something missing or incorrect on this page please notify us via the forum.


Board footer

Powered by FluxBB